Желе провода стыковой Соединитель проводов Соединитель IDC Разъем герметичный влагостойкий 3М 101E
Быстрая Деталь:
1. Разъем 101E из поликарбоната
2. провода диапазон 0,7-0,4 мм (21-проводник 26awg)
3. изоляция вне диаметра до 1.4 мм (0.055")
4. Цвет:Синий
5. С гелем
6. Упаковка: 50шт/мешок, 500шт/коробка, 5000pcs/УУ.
7. 6,9 кг/кор
Описание:
101E
Герметичный влагостойкий четыре провода(1 полный пара) разъем для твердой меди 0,7-0,4 мм (21-проводник 26awg) кабель. 1.4 мм (0.055") Максимальная изоляция Д. О.
101I
Сухая четыре провода(1 полный пара) разъем для твердой меди 0,7-0,4 мм (21-проводник 26awg) кабель.1.4 мм (0.055") Максимальная изоляция Д. О.
Разъемы крана голодайте для того чтобы установить, легкий для работы с и доступны в широком диапазоне общего провода датчиков.Разъемы крана позволяют прямое использование существующих медных проводников без прерывания обслуживания. Функция предварительного обжатия помогает удерживать провода на месте, пока разъем обжимается и соединение закончено.
Различные соединители смещения изоляции для кошки.5 соответствие,сухой или gell-заполненный по продажам:
Встроенные и провода разъемы могут быть использованы только с ручной обжимной инструмент ил-8028(3М пункта нет.Е-9BM) ,ил-8021 обжимной инструмент (3М пункта нет.Е-9 лет), для Вашего варианта.
Приложения:
3M Тип разъемы провода, разъем uy, разъем UY2, UR разъем, разъем UB, UG и соединитель UDW2 соединитель на продажу. Этот провод разъемы используются для подключения двух проводов быстро и безопасно с питательным гелем внутри, которая не пропускает влагу.
Спецификации:
UR connector
|
Gel filled for moisture resistance and
for PIC cable applications, filled or unfilled. It accepts two or three wires
within wire range of 0.4-0.9 mm (26-19 AWG) and insulation outside diameter
up to 1.52 mm/.060". It is made of polycarbonate and is Cat. 5
compliant.
|
UY connector
|
Gel filled for moisture resistance and
is suitable for PIC cable applications, filled or unfilled. It accepts two
wires within wire range of 0.4-0.7 mm (26-22 AWG) and insulation outside
diameter up to 1.52 mm/.06". It is made of polycarbonate and is Cat. 5
compliant.
|
UY2 connector
|
gel filled for moisture resistance and
is suitable for PIC cable applications, filled or unfilled.It accepts two
wires within wire range of 0.4-0.9 mm (26-19 AWG) and insulation outside
diameter up to 2.08 mm/.082". It is made of polypropylene and is Cat. 5
compliant.
|
UDW2 Connector
|
is a four wire (one full pair) aerial
inline drop-wire connector for copper or copper coated steel conductors. It
is used for mid-span splices where strain relief is provided. Gel filled for moisture
resistance and for PIC cable applications, it accepts conductors within wire
range of 0.9-1.3 mm (19-16 AWG) and insulation outside diameter up to 4.4
mm/.175". It is made of polycarbonate.
|
UG connector
|
llows direct tapping into existing
plastic insulated solid copper conductors without interrupting service. It is
gel filled for moisture resistance and for PIC cable applications, filled or
filled. It accepts conductors within wire range of 0.4-0.9 mm (26-19 AWG) tap
and 0.4-0.7 mm (26-22 AWG) run wire with insulation outside diameter up to
1.54 mm/.061" tap and 1.12 mm/.044" run wire. It is made of
polycarbonate.
|
U1B
|
A sealed moisture-resistant four
wire(1 full pair) inline drop-wire
connector for solid copper 1.3-0.9 mm (16-19AWG) cable.
3.18mm (0.125") Maximum Insulation O.D.
|
U1B-2
|
A sealed moisture-resistant four
wire(1 full pair) inline drop-wire
connector for solid copper 0.9-0.5 mm (19-24AWG) cable.
2.30mm (0.091") Maximum Insulation O.D.
|
U1R
|
A sealed moisture-resistant four
wire(1 full pair) inline drop-wire
connector for solid copper 0.9-0.5 mm (19-24AWG) cable.
3.18mm (0.125") Maximum Insulation O.D.
|